Matte polyester film
Product application: digital inkjet material base material, building materials release film, all kinds of label base material, etc.
Product performance characteristics:
·Low surface gloss
·The light transmittance is suitable
·It has excellent mechanical properties and heat resistance
·Good flatness
Product specifications
| Thickness | Width | Inner diameter of core |
| 12~50μm | 500~2000mm | 76mm（3″），152mm（6″） |
Typical performance
| Project | Unit | Typical value | Test method | ||||
| Thickness | μm | 12 | 19 | 25 | 50 | DIN 53370 | |
| Tensile strength | MD | Mpa | 160 | 160 | 160 | 160 | GB12802.2-2004 |
| TD | Mpa | 190 | 190 | 190 | 190 | GB12802.2-2004 | |
| Elongation at break | MD | % | 100 | 100 | 95 | 95 | GB12802.2-2004 |
| TD | % | 90 | 90 | 80 | 80 | GB12802.2-2004 | |
| Gloss（45°） | % | 48 | 45 | 32 | 35 | GB8807 | |
| Thermal shrinkage150℃，30min | MD | % | 1.5 | 1.2 | 1.2 | 1 | GB12802.2-2004 |
| TD | % | 0.2 | 0.2 | 0.1 | 0 | GB12802.2-2004 | |
| Haze | % | 63 | 70 | 80 | 88 | GB2410-80 | |
| Transmittance | % | 60 | 60 | 55 | 50 | GB2410-80 | |
| Corona treatment intensity | Treatment surface | Dyn/cm | 52 | ASTM D2578 | |||
| Non treated surface | 44 | ||||||
The above data are for reference only, and can be adjusted according to the customer's requirements.
Product notes:The above information only provides some reference suggestions for the experiment or use of customers. If there are new knowledge and new experience, we will modify this information accordingly. Due to the different equipment and processing conditions of each manufacturer, the use and requirements of the final product are different, instead of being responsible for your specific use methods and application requirements.
CONTACT
Tel: 0760-88329231
Add: (beside Shunjing transformer substation), Hongjing Road, Banfu Town, Zhongshan City, Guangdong Province
E-mail: liuhongchan@yahoo.com.cn
FEEDBACK